If you have questions about the use or features of your SanDisk player as well as other SanDisk products, please visit our Knowledgebase at kb. I have been almost universally successful in recovering Sansa players using one or a combination of these methods. My Sansa SanDisk does only turn on when i connect it to usb. The old battery has an attached small board which is connected to the player via 3 wires. It would be an excellent choice for audiobooks if it charged correctly. After that, you will have to do the same on the new battery, since the Shuffle circuit is not compatible. You may have to restart your computer after each of these methods to get them to work properly.
Note: this method doesn't work if already have the latest firmware. It wont charge if it is turned on, and it won't charges if it's turned off. Quick Tips: While on shuffle mode, Forward and Backwards will randomly select a song. Audible says that it support the SanDisk, and they promise to keep working on it, but for now it doesn't work. Keep holding the volume + button for an additional 5-50 seconds. Your Sansa ® will show connected and the yellow charging indicator will appear.
It takes approximately 3 hours to fully charge the battery. I think these little SanDisk players are great for the price. Good luck Jan 31, 2010 Make sure the player is fully charged. The poles are the same, and similarly labelled with a + on the left, and a - on the right. Click on the Sync tab. Power Saver This option turns the player off automatically when it has been idle for a defined period of time.
Resetting a Clip Zip, Clip+, Sansa Fuze+, c200 series, e200 series, or e200R series player: 1. Some cables are data only and will not charge the device despite appearing so. Take it back or contact SanDisk directly about a replacement if it's less than 1 year old. What is the right temperature for soldering tool? Jan 26, 2009 when you plug it in to the usb cord charger, and then plug it out, it turns because it maybe does not have enough energy to keep it running to your standard. You may have to restart your computer after each of these methods to get them to work properly. These methods do not work if you are having synchronization or music format issues - they are for recovering a player that will not power up, freezes, flashes, is not recognized by the , and a host of other issues.
Some things to check for when your player does not act like its taking a charge. I plugged it into my puter with the cord that came with it, does not charge that way. I can plug it in with a partial charge and when I unplug it an hour later, the battery is dead. Tried that several times with no-go. Step1: What you'll want to do is Make sure you have the player charging for about half an hour or when the battery is at about 30-40%. New battery should have around half a charge, which you can use, or charge as you usually would, and go! Jan 30, 2010 Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. As always, use your own discretion with all advice here.
After 5 minutes, it was charging. Insert new battery or reset the old battery. Note: Many times batteries come with a plastic label stuck to the outside of it, this can be easily peeled off to reveal the attached board and + - markings on the battery casing, just be careful not to damage connections from battery to board. The original Clip battery is 3. Erforderlich sind Kaufnachweis mit Datum und Ort des Technologie Digital Rights Management von Microsoft für Windows-Medien, Kaufs sowie Name des Händlers sowie Name, Typ und Nummer des Produkts.
I once plugged it in on a wall charger, and it charged once. Some reviewers even stated they would be buying an additional Sansa Mp3 player to give as a gift because they were so impressed the quality. Battery Indicator Displays the battery status. This includes asking for us to link to your subreddit, forum, bulletin board, newsgroup, Facebook page, whatever. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. The battery must be charged within X days see chart below to avoid battery related issues. Cover the board connections and battery end with one or two wraps of electrical tape.
Note: you have to be careful in prying the 2 halves of the Clip apart; a thin piece of plastic could help, starting to pry apart at the on switch--there have been various posts on this you might want to do a search, using the box at the upper left. Press the Back button to return to previous menu. The Fuze and View have full colour screens, and a mechanical touch wheel for browsing through music and changing the volume. Try to research your issue before posting, don't be vague. If it works, then you need a new cable. It should supply at least 600 mA. Изделия SanDisk не должны применяться.